SLR3060-MID, PROTON VIETNAM

Từ năm 1999, Proton là một trong những thương hiệu tiên phong về giải pháp đo lường cho ngành sản xuất sợi và cáp.

Proton thấu hiểu nhu cầu thực sự của nhà sản xuất sợi và cáp, từ đó đưa ra các sản phẩm tiên tiến nhằm cung cấp các giải pháp đo lường chính xác và dễ dàng sử dụng.

Qua đó, sản phẩm của Proton đã xuất hiện trong dây chuyền sản xuất của các nhà sản xuất sợi và cáp hàng đầu thế giới.

Vui lòng liên hệ Hotline 0912 300 549 để được tư vấn thêm.

Introduction

Proton Products InteliSENS® SLR-MID Series non-contact, bidirectional speed and length gauges provide extremely accurate speed and length measurements in almost any production environment and are MID-certified (certificate number: UK/0126/0120) for final shipping length measurement for products destined for EU-markets (EU Directives 2014/32/EU 2004/22/EC).

Automatic direction detection and measurement down to zero speed means that the InteliSENS® SLR gauge length measurement counts both up and down, so final length measurements will still be accurate to 0.05% even with production lines that exhibit stoppage, direction reversal and creepage.

Production processes for wire, cable, web products, woven and non-woven materials, paper, plastic film, tapes, building materials, floorings and labelling can all be measured using the laser Doppler method.

Applications requiring a precise cut-to-length process benefit from the non-slip and highly accurate laser measurement technique which reduces scrap, increases uptime and improves material yield by eliminating product “Give Away” or “Short Length” claims.

InteliSENS® SLR-MID Series gauges are money-saving, direct replacements for traditional problematic and high-maintenance contact wheel and roller-type devices and are extremely easy to install and operate. Integration with production line controllers such as PLCs is eased by the availability of a wide variety of industry standard communications interfaces.

The InteliSENS® SLR-MID Series is fully-certified to Class 1 accuracy (0.125%) for final shipping length measurement on bidirectional lines for products destined for EU-markets (EU Directives 2014/32/EU 2004/22/EC).

Operating principle – Heterodyne laser surface velocimeter

Proton Products InteliSENS® series speed and length gauges illuminate the measured surface with a precisely pitched interference pattern created by the intersection of two laser beams. The alternating bright and dark interference fringes modulate the light scattered by the object with a frequency proportional to the object speed. This scattered light is detected by a photodiode and the electrical signal digitally processed to determine the frequency and hence the speed. Object length is then calculated by integrating the speed measurement over time.

The InteliSENS® SLR-MID Series bidirectional speed and length gauges extend this principle by using a high-frequency Bragg cell modulator to illuminate the measured surface with a scanning interference pattern, which generates an oscillating light signal even when the object is stationary. Direction of motion is determined by whether the scattered light frequency is higher or lower than the stationary frequency.

Specifications