Mr HàVT95: Voltage Transducer Vietnam
| Voltage Input 0-150 VAC, 0-300 VAC
- Analog Output 4-20 mA, 0-5 VDC, 0-10 VDC |
Voltage Transducer VT95 is designed for converting sinusoidal alternating voltage into a load dependent DC output signal proportional to the measured RMS input values.
|
Input |
|
|---|---|
|
Number of channel: |
1 Channel |
|
Input type: |
Voltage |
|
Input range: |
0 to 150, 0 to 300 VAC |
|
(Overange 120% continuously, 150% for 10 sec) |
|
|
Input loss: |
< 0.3 VA |
|
Analog Output |
|
|---|---|
|
Number of channel: |
1 Channel |
|
Output Type: |
Current, Voltage |
|
Output Range: |
Current Max 0 to 1 mA (Load Resistance 10 KΩ) |
|
Current Max 0 to 5 mA (Load Resistance 2 KΩ) |
|
|
Current Max 0 to 10 mA (Load Resistance 1 KΩ) |
|
|
Current Max 0 to 20 mA (Load Resistance 600 Ω) |
|
|
Current Max 4 to 20 mA (Load Resistance 600 Ω) |
|
|
Voltage Min 0 to 10 mVDC (Load Resistance 500 Ω) |
|
|
Voltage Min 0 to 100 mVDC (Load Resistance 500 Ω) |
|
|
Voltage Min 0 to 1 VDC (Load Resistance 500 Ω) |
|
|
Voltage Min 0 to 5 VDC (Load Resistance 1 KΩ) |
|
|
Voltage Min 1 to 5 VDC (Load Resistance 1 KΩ) |
|
|
Voltage Min 0 to 10 VDC (Load Resistance 2 KΩ) |
|
|
Linearity: |
< ± 0.5 % of span |
|
Power Requirements |
|
|---|---|
|
Power Supply: |
110, 220 VAC |
|
Environmental Limits |
|
|---|---|
|
Operating Temperature: |
0 to 55 °C |
|
Operating Humidity: |
5 to 95 %RH |
|
Storage Temperature: |
0 to 70 °C |
|
Physical Characteristics |
|
|---|---|
|
Dimension: |
W50 x H70 x D130 mm. |
|
Mounting: |
Wall or DIN rail |
|
Connection: |
plug - in Wiring Screw terminals on base socket |
|
Warranty |
|
|---|---|
|
Warranty Period: |
5 year |
| Ordering Information: | Specify Input, Output, Power supply |
| Example | VT95/0-150 VAC/4-20 mA/220 VAC |
Package Checklist
1. VT95
