Mr HàASCO CO2 Flowmeter
The ASCO CO2 Flowmeter has been developed to accurately measure CO2 gas flow in closed pipes.
The power unit, which supplies 230 V, operates a microprocessor controlled flow computer and one sensor.
The ASCO CO2 Flowmeter is a complete system which is supplied fully calibrated and wired and therefore very easy to install.
Features
l easy to install l no moving parts l very accurate (0.1 %) l direct mass flow reading l single point measurement l tension free contact alarm and l no pressure and temperature fault status output compensation required l self-testing electronics
Accurate CO2 measurement can help to find CO2 leaks and to achieve optimum CO2 yields. Practical tests have shown that by using an ASCO CO2 Flowmeter, CO2 savings of up to 30% can be achieved.
ASCO CO2 Flowmeter MF15 part no. 4062504 ASCO CO2 Vietnam
ASCO CO2 Flowmeter MF15 Mass flow sensor Type MF15 (fully calibrated) assembled to process pipe DN 15, PN 40 with flange connection DIN 2635. Measuring range 0-1‘000kg/h ( 0- 2205lb/h) at 22 bar (319.08psi) The flow computer (on wall bracket) is equipped with digital display of current CO2 flow rateinkg/h as well as totalizer and integrated keyboard. 10 meter connection cable with plug is prewired and connected. Voltage 115 -230 V, 50/60 Hz
Accessories included:
• 2 pcs counterflange DN 15/PN40 welding (item no. 910101)
• 8 pcs screw M12x45, hex., inox (item no. 100020)
• 8 pcs Nut M12, inox (item no. 100022)
• 2 pcs gasket DN15, 2 x 51 x 22mm ( (item no. 110150)
ASCO CO2 Flowmeter MF25 part no. 4062505 ASCO CO2 Vietnam
ASCO CO2 Flowmeter MF25 Mass flow sensor Type MF25 (fully calibrated) assembled to process pipe DN 25, PN 40 with flange connection DIN 2635. Measuring range 0-2‘700kg/h (0-5'952lb/h) at 22 bar (319.08psi) The flow computer (on wall bracket) is equipped with digital display of current CO2 flow rate inkg/h as well as totalizer and integrated keyboard. 10 meter connection cable with plug is prewired and connected. Voltage 115-230 V, 50/60 Hz
Accessories included:
• 2 pcs counterflange DN 25/PN40 welding (item no. 910301)
• 8 pcs screw M12x45, hex., inox (item no. 100020)
• 8 pcs Nut M12, inox (item no. 100022)
• 2 pcsgasket DN25, 2 x 71 x 35mm (0.08 x 2.80 x 1.38in) (item no. 110151)
