In-Line Turbidimeter for hazardous areas_Thiết bị đo đo đục dùng cho khu vực nguy hiểm-Sigrist Vietnam, đại lý Sigrist tại Việt Nam, Nhà phân phối Sigrist tại Việt Nam
Xuất sứ: Thụy Sỹ
Nhà cung cấp: Pitesco
Hãng sản xuất: Sigrist photometer
Mr HàIn-Line Turbidimeter for hazardous areas
The DualScat monitors turbidity in liquids, using a single light source to detect transmittel light and scattered light at 90° and 25°. This allows for getting information about the particle size causing the turbidity as well as for compensation of colour and fouling influence. Calibration check is performed with a calibration unit with a glass reference. The Ex version is offered with flameproof encapsulation for installations in areas requiring explosion protection.
Single- or dual-angle measurement with one sensor head
Protection class Ex d IIC
Measuring span 0..500 EBC (0..2'000 NTU)
SPECIFICATION
Measuring principle
90°/25° scattered light measurement at 650 nm
Nominal range
0 .. 500 EBC (0 .. 2'000 NTU)
Installation
In-line housing (e.g. Varivent) DN40 .. DN150
Protection class
Ex d IIC
Protection
IP66
Display
LC display with plain text information
Sample temperature
-20 .. +80 °C
Sample pressure
0 .. 2'000 kPa (0 .. 20 bar)
Ambient environment
-20 .. +50 °C
0 .. 100% rel. Humidity
Maximum service altitude
3,000 m above sea level
Power supply
85 .. 264 V / 47 .. 440 Hz or 24 V DC
Analog outputs
0/4 .. 20 mA for each detection angle
Limits
2 separately configurable relay contacts
Sensor head
Basic material: SS 1.4435 (316L)
Window material: Pyrex or Sapphire
Sealing material: EPDM, NBR, Viton or Kalrez
Control Units
